Filtrec · Filtrec elements · inline line
DHD280G05B filter element: specifications & equivalents
The DHD280G05B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 69 × 355 mm OD × length (ID 34.2 mm), rated at 7 µm absolute (β7(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 7 µm |
| Rating basis | absolute |
| Beta ratio | β7(c)≥1000 |
| Outside diameter OD | 69 mm |
| Inside diameter ID | 34.2 mm |
| Length | 355 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | DHD280G05B |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 69 mm (2.717 in) |
| Inside diameter | 34.2 mm (1.346 in) |
| Overall length | 355 mm (13.976 in) |
All 69×355 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 02.0280D.6VG.30.HC.E.P | Eaton / Internormen | full | Filtrec's official Cross Navigator maps INTERNORMEN 02.0280D.6VG.30.HC.E.P to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 0280D005ONPS page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 0280D005ONPS to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ DP108A005ANP01 | MP Filtri | full | Filtrec's official Cross Navigator maps MP FILTRI DP108A005ANP01 to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC2216FCN14H | Pall | full | Filtrec's official Cross Navigator maps PALL HC2216FCN14H to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC2216FKN14H | Pall | full | Filtrec's official Cross Navigator maps PALL HC2216FKN14H to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SBF-0280D-Z5B | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER SBF0280DZ5B to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SE-125-G-05-B | STAUFF | full | Filtrec's official Cross Navigator maps STAUFF SE125G05B to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ SE125G05B4 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps STAUFF SE125G05B4 to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 0280 D 005 ON | HYDAC | partial | Filtrec's official Cross Navigator maps HYDAC 0280D005ON to FILTREC DHD280G05B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (5 vs 7 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ PT23265-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists DHD280G05B (FILTREC) as replaced by Baldwin PT23265-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the DHD280G05B model number is decoded
- G06Filtrec internal media grade code (glassfiber, 7 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the DHD280G05B filter element?
What micron rating does DHD280G05B use?
What replaces the DHD280G05B filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 37 catalog element(s) share the 69×355 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 6/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.