Filtrec · Filtrec elements · inline line

DHD1320A10B filter element: specifications & equivalents

Q: What are the dimensions of the DHD1320A10B filter element?

The published envelope is 90.5 mm OD × 651 mm length with a 48.2 mm inside diameter (3.563 × 25.630 in × 1.898 in ID). Confirm against the housing drawing before ordering.

The DHD1320A10B is a Filtrec inline-line hydraulic filter element, sized 90.5 × 651 mm OD × length (ID 48.2 mm). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 90.5 × 651 mm

Inside diameter 48.2 mm

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Outside diameter OD	90.5 mm
Inside diameter ID	48.2 mm
Length	651 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DHD1320A10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	90.5 mm (3.563 in)
Inside diameter	48.2 mm (1.898 in)
Overall length	651 mm (25.630 in)

All 91×651 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ SE300A10B page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps STAUFF SE300A10B to FILTREC DHD1320A10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SE300A10B4 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps STAUFF SE300A10B4 to FILTREC DHD1320A10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DHD1320A10B model number is decoded

A10Filtrec internal media grade code (media).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Frequently asked questions

What are the dimensions of the DHD1320A10B filter element?

The published envelope is 90.5 mm OD × 651 mm length with a 48.2 mm inside diameter (3.563 × 25.630 in × 1.898 in ID). Confirm against the housing drawing before ordering.

What replaces the DHD1320A10B filter element?

2 catalog-confirmed full match(es) (SE300A10B, SE300A10B4)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 36 catalog element(s) share the 91×651 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D1104G10A Filtrec · 12 µm D1104G10AV Filtrec · 12 µm D1104G10B Filtrec · 12 µm D1104G10BV Filtrec · 12 µm D1104G25A Filtrec · 22 µm D1104G25AV Filtrec · 22 µm D1104G25B Filtrec · 22 µm D1104G25BV Filtrec · 22 µm DHD1320G03B Filtrec · 5 µm DHD1320G03B/ESD Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 5/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.