Filtrec · Filtrec elements · inline line
DHD110H20V filter element: specifications & equivalents
The DHD110H20V is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 47 × 153 mm OD × length (ID 22.1 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 22 µm |
| Rating basis | absolute |
| Beta ratio | β22(c)≥1000 |
| Outside diameter OD | 47 mm |
| Inside diameter ID | 22.1 mm |
| Length | 153 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | DHD110H20V |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 47 mm (1.850 in) |
| Inside diameter | 22.1 mm (0.870 in) |
| Overall length | 153 mm (6.024 in) |
All 47×153 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ QH111DA25V page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps QUALITY FILTRATION QH111DA25V to FILTREC DHD110H20V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SBF-0111D-Z25V | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER SBF0111DZ25V to FILTREC DHD110H20V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 0110 D 020 BH4HC /-V | HYDAC | partial | Filtrec's official Cross Navigator maps HYDAC 0110D020BH4HCV to FILTREC DHD110H20V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (20 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the DHD110H20V model number is decoded
- G25Filtrec internal media grade code (glassfiber, 22 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the DHD110H20V filter element?
What micron rating does DHD110H20V use?
What replaces the DHD110H20V filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 83 catalog element(s) share the 47×153 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 5/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.