Filtrec · Filtrec elements · inline line

DHD110H10B filter element: specifications & equivalents

Q: What are the dimensions of the DHD110H10B filter element?

The published envelope is 47 mm OD × 153 mm length with a 22.1 mm inside diameter (1.850 × 6.024 in × 0.870 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DHD110H10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DHD110H10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 47 × 153 mm OD × length (ID 22.1 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 47 × 153 mm

Inside diameter 22.1 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	47 mm
Inside diameter ID	22.1 mm
Length	153 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DHD110H10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	47 mm (1.850 in)
Inside diameter	22.1 mm (0.870 in)
Overall length	153 mm (6.024 in)

All 47×153 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ BHHC110TC10C10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC BHHC110TC10C10 to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FFKPVL17202A10ABS page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FINN FILTER FFKPVL17202A10ABS to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ H110D10H page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps SEPARATION TECHNOLOGIES H110D10H to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC2207FCS6H	Pall	full	Filtrec's official Cross Navigator maps PALL HC2207FCS6H to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PR3095	Parker	full	Filtrec's official Cross Navigator maps PARKER PR3095 to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SE-030-H-10-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SE030H10B to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SE030H10B4 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps STAUFF SE030H10B4 to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 0110 D 010 BH4HC	HYDAC	partial	Filtrec's official Cross Navigator maps HYDAC 0110D010BH4HC to FILTREC DHD110H10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF30217	Fleetguard	partial	Fleetguard's online catalog lists DHD110H10B as an interchange for HF30217. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SBF-0111D-Z10B	Schroeder Industries	partial	Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DHD110H10B model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DHD110H10B filter element?

The published envelope is 47 mm OD × 153 mm length with a 22.1 mm inside diameter (1.850 × 6.024 in × 0.870 in ID). Confirm against the housing drawing before ordering.

What micron rating does DHD110H10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DHD110H10B filter element?

7 catalog-confirmed full match(es) (BHHC110TC10C10, FFKPVL17202A10ABS, H110D10H…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 83 catalog element(s) share the 47×153 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R3.0516-03K1 ARGO-HYTOS · 5 µm R3.0516-06K1 ARGO-HYTOS · 10 µm R3.0516-08K1 ARGO-HYTOS · 16 µm R3.0516-23K1 ARGO-HYTOS · 5 µm R3.0516-26K1 ARGO-HYTOS · 10 µm R3.0516-28K1 ARGO-HYTOS · 16 µm DHD110G03B Filtrec · 5 µm DHD110G03B/ESD Filtrec · 5 µm DHD110G03V Filtrec · 5 µm DHD110G03V/ESD Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 5/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.