Filtrec · Filtrec elements · inline line

DHD110G20B filter element: specifications & equivalents

Q: What are the dimensions of the DHD110G20B filter element?

The published envelope is 47 mm OD × 153 mm length with a 22.4 mm inside diameter (1.850 × 6.024 in × 0.882 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does DHD110G20B use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The DHD110G20B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 47 × 153 mm OD × length (ID 22.4 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 47 × 153 mm

Inside diameter 22.4 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	47 mm
Inside diameter ID	22.4 mm
Length	153 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	DHD110G20B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	47 mm (1.850 in)
Inside diameter	22.4 mm (0.882 in)
Overall length	153 mm (6.024 in)

All 47×153 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 0110D020ONPS page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 0110D020ONPS to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 0110EAM252N1 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps PUROLATOR 0110EAM252N1 to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ D0110A25NHA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI D0110A25NHA to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PT8954-MPG	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN PT8954MPG to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ QH110DA25B page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps QUALITY FILTRATION QH110DA25B to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SE030D20B4 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps STAUFF SE030D20B4 to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SE-030-G-20-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SE030G20B to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SE030G20B4 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps STAUFF SE030G20B4 to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 0110 D 020 ON	HYDAC	partial	Filtrec's official Cross Navigator maps HYDAC 0110D020ON to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (20 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HC2206FCT6H	Pall	partial	Filtrec's official Cross Navigator maps PALL HC2206FCT6H to FILTREC DHD110G20B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HD512/2	MANN-FILTER	partial	MANN-FILTER's online catalog lists DHD110G20B (FILTREC) as a comparison number for HD5122. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF6867	Fleetguard	partial	Fleetguard's online catalog lists DHD110G20B as an interchange for HF6867. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SBF-0110D-Z25B	Schroeder Industries	partial	Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the DHD110G20B model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the DHD110G20B filter element?

The published envelope is 47 mm OD × 153 mm length with a 22.4 mm inside diameter (1.850 × 6.024 in × 0.882 in ID). Confirm against the housing drawing before ordering.

What micron rating does DHD110G20B use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the DHD110G20B filter element?

8 catalog-confirmed full match(es) (0110D020ONPS, 0110EAM252N1, D0110A25NHA…); 5 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 83 catalog element(s) share the 47×153 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

R3.0516-03K1 ARGO-HYTOS · 5 µm R3.0516-06K1 ARGO-HYTOS · 10 µm R3.0516-08K1 ARGO-HYTOS · 16 µm R3.0516-23K1 ARGO-HYTOS · 5 µm R3.0516-26K1 ARGO-HYTOS · 10 µm R3.0516-28K1 ARGO-HYTOS · 16 µm DHD110G03B Filtrec · 5 µm DHD110G03B/ESD Filtrec · 5 µm DHD110G03V Filtrec · 5 µm DHD110G03V/ESD Filtrec · 5 µm

Other models in the Filtrec elements series

All 9874 (list page 5/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.