Filtrec · Filtrec elements · inline line
DHD110G10V filter element: specifications & equivalents
The DHD110G10V is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 47 × 153 mm OD × length (ID 22.4 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 12 µm |
| Rating basis | absolute |
| Beta ratio | β12(c)≥1000 |
| Outside diameter OD | 47 mm |
| Inside diameter ID | 22.4 mm |
| Length | 153 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | DHD110G10V |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 47 mm (1.850 in) |
| Inside diameter | 22.4 mm (0.882 in) |
| Overall length | 153 mm (6.024 in) |
All 47×153 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 01251438 page in verification queue | UFI | full | Filtrec's official Cross Navigator maps HYDAC 01251438 to FILTREC DHD110G10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SBF-0110D-Z10V | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER SBF0110DZ10V to FILTREC DHD110G10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 0110 D 010 ON /-V | HYDAC | partial | Filtrec's official Cross Navigator maps HYDAC 0110D010ONV to FILTREC DHD110G10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ 57872 | WIX Filters | partial | Filtrec's official Cross Navigator maps WIX 57872 to FILTREC DHD110G10V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HF6866 | Fleetguard | partial | Fleetguard's online catalog lists DHD110G10V as an interchange for HF6866. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the DHD110G10V model number is decoded
- G10Filtrec internal media grade code (glassfiber, 12 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (DHD family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the DHD110G10V filter element?
What micron rating does DHD110G10V use?
What replaces the DHD110G10V filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 83 catalog element(s) share the 47×153 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 5/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.