Filtrec · Filtrec elements · inline line

D810C25RA filter element: specifications & equivalents

Q: What are the dimensions of the D810C25RA filter element?

The published envelope is 45.5 mm OD × 104 mm length with a 20.5 mm inside diameter (1.791 × 4.094 in × 0.807 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D810C25RA use?

This element is rated 25 µm (nominal class) — β25(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D810C25RA is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 45.5 × 104 mm OD × length (ID 20.5 mm), rated at 25 µm class (β25(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 45.5 × 104 mm

Inside diameter 20.5 mm

Filtration rating 25 µm nom.

Beta rating β 25(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	25 µm
Rating basis	nominal
Beta ratio	β25(c)≥2
Outside diameter OD	45.5 mm
Inside diameter ID	20.5 mm
Length	104 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D810C25RA
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	45.5 mm (1.791 in)
Inside diameter	20.5 mm (0.807 in)
Overall length	104 mm (4.094 in)

All 46×104 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ P3051002K3 page in verification queue	Donaldson	full	Filtrec's official Cross Navigator maps ARGO-HYTOS P3051002K3 to FILTREC D810C25RA as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PR4475	Parker	full	Filtrec's official Cross Navigator maps PARKER PR4475 to FILTREC D810C25RA as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SD-010-K-20-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SD010K20B to FILTREC D810C25RA as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ PT23309	Baldwin Filters	partial	Baldwin's Form 561 Number-Finder cross-reference lists D810C25RA (FILTREC) as replaced by Baldwin PT23309. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D810C25RA model number is decoded

C25RFiltrec internal media grade code (cellulose, 25 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D810C25RA filter element?

The published envelope is 45.5 mm OD × 104 mm length with a 20.5 mm inside diameter (1.791 × 4.094 in × 0.807 in ID). Confirm against the housing drawing before ordering.

What micron rating does D810C25RA use?

This element is rated 25 µm (nominal class) — β25(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D810C25RA filter element?

3 catalog-confirmed full match(es) (P3051002K3, PR4475, SD-010-K-20-B); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 22 catalog element(s) share the 46×104 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D810C10A Filtrec · 10 µm D810C10RA Filtrec · 10 µm D810C10RAV Filtrec · 10 µm D810C25A Filtrec · 25 µm D810G03A Filtrec · 5 µm D810G03AV Filtrec · 5 µm D810G10A Filtrec · 12 µm D810G10AV Filtrec · 12 µm D810G25A Filtrec · 22 µm D810G25AV Filtrec · 22 µm

Other models in the Filtrec elements series

All 9874 (list page 5/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.