Filtrec · Filtrec elements · inline line
D143G25A filter element: specifications & equivalents
The D143G25A is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 78 × 428 mm OD × length (ID 43.2 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 78 × 428 mm
Inside diameter 43.2 mm
Filtration rating 22 µm abs.
Beta rating β 22(c)≥1000
Media glassfiber
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 22 µm |
| Rating basis | absolute |
| Beta ratio | β22(c)≥1000 |
| Outside diameter OD | 78 mm |
| Inside diameter ID | 43.2 mm |
| Length | 428 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | D143G25A |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 78 mm (3.071 in) |
| Inside diameter | 43.2 mm (1.701 in) |
| Overall length | 428 mm (16.850 in) |
All 78×428 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 11116D25BN page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 11116D25BN to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ CF9604A25NA page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FAI FILTRI CF9604A25NA to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF8079 | Fleetguard | full | Filtrec's official Cross Navigator maps FLEETGUARD HF8079 to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ QH9600A25B16 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps QUALITY FILTRATION QH9600A25B16 to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SP-130-E-20-B | STAUFF | full | Filtrec's official Cross Navigator maps STAUFF SP130E20B to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ V6021B5C20 | Eaton / Internormen | full | Filtrec's official Cross Navigator maps VICKERS V6021B5C20 to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 05.9600.25VG.10.E.P.16 | Eaton / Internormen | partial | Filtrec's official Cross Navigator maps INTERNORMEN 05.9600.25VG.10.E.P.16 to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (20 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ 51684 | WIX Filters | partial | Filtrec's official Cross Navigator maps WIX 51684 to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (7 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ H9086 | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists D143G25A (FILTREC) as replaced by Baldwin H9086. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HC9600FCT16H | Pall | partial | Filtrec's official Cross Navigator maps PALL HC9600FCT16H to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HC9600FKT16H | Pall | partial | Filtrec's official Cross Navigator maps PALL HC9600FKT16H to FILTREC D143G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HD882/4 | MANN-FILTER | partial | MANN-FILTER's online catalog lists D143G25A (FILTREC) as a comparison number for HD8824. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF7079 | Fleetguard | partial | Fleetguard's online catalog lists D143G25A as an interchange for HF7079. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9600-16Z25B | Schroeder Industries | partial | Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the D143G25A model number is decoded
- G25Filtrec internal media grade code (glassfiber, 22 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the D143G25A filter element?
The published envelope is 78 mm OD × 428 mm length with a 43.2 mm inside diameter (3.071 × 16.850 in × 1.701 in ID). Confirm against the housing drawing before ordering.
What micron rating does D143G25A use?
This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the D143G25A filter element?
6 catalog-confirmed full match(es) (11116D25BN, CF9604A25NA, HF8079…); 8 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
Same-envelope elements from other brands
View full interchange →These 47 catalog element(s) share the 78×428 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
D143C10A D143C10AV D143C25A D143C25AV D143G01A D143G01A/ESD D143G01AV D143G01AV/ESD D143G01B D143G01BV
Other models in the Filtrec elements series
All 9874 (list page 3/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.