Filtrec · Filtrec elements · inline line
D141G03A filter element: specifications & equivalents
The D141G03A is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 78 × 209 mm OD × length (ID 43.2 mm), rated at 5 µm absolute (β5(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 78 × 209 mm
Inside diameter 43.2 mm
Filtration rating 5 µm abs.
Beta rating β 5(c)≥1000
Media glassfiber
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 5 µm |
| Rating basis | absolute |
| Beta ratio | β5(c)≥1000 |
| Outside diameter OD | 78 mm |
| Inside diameter ID | 43.2 mm |
| Length | 209 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | D141G03A |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 78 mm (3.071 in) |
| Inside diameter | 43.2 mm (1.701 in) |
| Overall length | 209 mm (8.228 in) |
All 78×209 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 05.9600.3VG.10.E.P.8 | Eaton / Internormen | full | Filtrec's official Cross Navigator maps INTERNORMEN 05.9600.3VG.10.E.P.8 to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 51686 | WIX Filters | full | Filtrec's official Cross Navigator maps WIX 51686 to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 926697Q | Parker | full | Filtrec's official Cross Navigator maps PARKER 926697Q to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ H9073 | Baldwin Filters | full | Filtrec's official Cross Navigator maps BALDWIN H9073 to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC9600FCP8H | Pall | full | Filtrec's official Cross Navigator maps PALL HC9600FCP8H to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC9600FKP8H | Pall | full | Filtrec's official Cross Navigator maps PALL HC9600FKP8H to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF8068 | Fleetguard | full | Filtrec's official Cross Navigator maps FLEETGUARD HF8068 to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SBF-9600-8Z1B | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER SBF96008Z1B to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 8TZ1 | Schroeder Industries | partial | Filtrec's official Cross Navigator maps SCHROEDER 8TZ1 to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (1 vs 5 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ 8TZ3 | Schroeder Industries | partial | Filtrec's official Cross Navigator maps SCHROEDER 8TZ3 to FILTREC D141G03A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (3 vs 5 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HD846/3 | MANN-FILTER | partial | MANN-FILTER's online catalog lists D141G03A (FILTREC) as a comparison number for HD8463. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF30453 | Fleetguard | partial | Fleetguard's online catalog lists D141G03A as an interchange for HF30453. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF7068 | Fleetguard | partial | Fleetguard's online catalog lists D141G03A as an interchange for HF7068. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9600-8Z3B | Schroeder Industries | partial | Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals. |
| ↔ SP-070-E-03-B | STAUFF | partial | STAUFF Filter Interchange lists D141G03A (FILTREC) as replaced by SP-070-E-03-B. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the D141G03A model number is decoded
- G03Filtrec internal media grade code (glassfiber, 5 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Fine 5 µm media loads faster and runs at a higher cold Δp than coarser grades — only downgrade cleanliness targets if the system ISO 4406 code allows it.
Frequently asked questions
What are the dimensions of the D141G03A filter element?
The published envelope is 78 mm OD × 209 mm length with a 43.2 mm inside diameter (3.071 × 8.228 in × 1.701 in ID). Confirm against the housing drawing before ordering.
What micron rating does D141G03A use?
This element is rated 5 µm absolute — β5(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the D141G03A filter element?
8 catalog-confirmed full match(es) (05.9600.3VG.10.E.P.8, 51686, 926697Q…); 7 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
Same-envelope elements from other brands
View full interchange →These 58 catalog element(s) share the 78×209 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
D141C10A D141C10AV D141C25A D141C25AV D141G01A D141G01AV D141G01AV/ESD D141G03AV D141G03AV/ESD D141G06A
Other models in the Filtrec elements series
All 9874 (list page 3/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.