Filtrec · Filtrec elements · inline line

D130G10B filter element: specifications & equivalents

Q: What are the dimensions of the D130G10B filter element?

The published envelope is 51 mm OD × 120 mm length with a 27.1 mm inside diameter (2.008 × 4.724 in × 1.067 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D130G10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D130G10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 51 × 120 mm OD × length (ID 27.1 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 51 × 120 mm

Inside diameter 27.1 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	51 mm
Inside diameter ID	27.1 mm
Length	120 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D130G10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	51 mm (2.008 in)
Inside diameter	27.1 mm (1.067 in)
Overall length	120 mm (4.724 in)

All 51×120 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ AFKOVL241A10KP page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps AIRFIL AFKOVL241A10KP to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CDHP30A10BN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps DOMANGE CDHP30A10BN to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF1351A10HA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF1351A10HA to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CHP421F10YN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps OMT CHP421F10YN to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CHP421GYN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps OMT CHP421GYN to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP1351A10AH	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI HP1351A10AH to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP1351A10AHP01	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI HP1351A10AHP01 to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP1351A10HA	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI HP1351A10HA to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ P176623	Donaldson	partial	Filtrec's official Cross Navigator maps DONALDSON P176623 to FILTREC D130G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (11 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D130G10B model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D130G10B filter element?

The published envelope is 51 mm OD × 120 mm length with a 27.1 mm inside diameter (2.008 × 4.724 in × 1.067 in ID). Confirm against the housing drawing before ordering.

What micron rating does D130G10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D130G10B filter element?

8 catalog-confirmed full match(es) (AFKOVL241A10KP, CDHP30A10BN, CF1351A10HA…); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 7 catalog element(s) share the 51×120 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D130G03B Filtrec · 5 µm D130G06B Filtrec · 7 µm D130G10BV Filtrec · 12 µm D130G25B Filtrec · 22 µm D130T10B Filtrec · 10 µm D130T10BV Filtrec · 10 µm D130T25B Filtrec · 25 µm

Other models in the Filtrec elements series

All 9874 (list page 3/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.