Filtrec · Filtrec elements · inline line

D122G10B filter element: specifications & equivalents

Q: What are the dimensions of the D122G10B filter element?

The published envelope is 51 mm OD × 330 mm length with a 23.8 mm inside diameter (2.008 × 12.992 in × 0.937 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D122G10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D122G10B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 51 × 330 mm OD × length (ID 23.8 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 51 × 330 mm

Inside diameter 23.8 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	51 mm
Inside diameter ID	23.8 mm
Length	330 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D122G10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	51 mm (2.008 in)
Inside diameter	23.8 mm (0.937 in)
Overall length	330 mm (12.992 in)

All 51×330 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 11313D10BH page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 11313D10BH to FILTREC D122G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF9813A10HA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF9813A10HA to FILTREC D122G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FFKPVL17103A10ABS page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FINN FILTER FFKPVL17103A10ABS to FILTREC D122G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC9801FCS13H	Pall	full	Filtrec's official Cross Navigator maps PALL HC9801FCS13H to FILTREC D122G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP0505A10ASP01	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI HP0505A10AS to FILTREC D122G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP0505A10ASP01	MP Filtri	partial	Filtrec's official Cross Navigator maps MP FILTRI HP0505A10ASP01 to FILTREC D122G10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ SBF-9801-13Z10B	Schroeder Industries	partial	Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D122G10B model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D122G10B filter element?

The published envelope is 51 mm OD × 330 mm length with a 23.8 mm inside diameter (2.008 × 12.992 in × 0.937 in ID). Confirm against the housing drawing before ordering.

What micron rating does D122G10B use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D122G10B filter element?

5 catalog-confirmed full match(es) (11313D10BH, CF9813A10HA, FFKPVL17103A10ABS…); 2 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 12 catalog element(s) share the 51×330 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D122G01B Filtrec · 4 µm D122G01BV Filtrec · 4 µm D122G03B Filtrec · 5 µm D122G03BV Filtrec · 5 µm D122G03BV/ESD Filtrec · 5 µm D122G06B Filtrec · 7 µm D122G06BV Filtrec · 7 µm D122G10BV Filtrec · 12 µm D122G10BV/ESD Filtrec · 12 µm D122G25B Filtrec · 22 µm

Other models in the Filtrec elements series

All 9874 (list page 3/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.