Filtrec · Filtrec elements · inline line

D120G06A filter element: specifications & equivalents

Q: What are the dimensions of the D120G06A filter element?

The published envelope is 50 mm OD × 116 mm length with a 24.5 mm inside diameter (1.969 × 4.567 in × 0.965 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D120G06A use?

This element is rated 7 µm absolute — β7(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D120G06A is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 50 × 116 mm OD × length (ID 24.5 mm), rated at 7 µm absolute (β7(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 50 × 116 mm

Inside diameter 24.5 mm

Filtration rating 7 µm abs.

Beta rating β 7(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	7 µm
Rating basis	absolute
Beta ratio	β7(c)≥1000
Outside diameter OD	50 mm
Inside diameter ID	24.5 mm
Length	116 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D120G06A
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	50 mm (1.969 in)
Inside diameter	24.5 mm (0.965 in)
Overall length	116 mm (4.567 in)

All 50×116 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 05.9800.6VG.10.E.P.4	Eaton / Internormen	full	Filtrec's official Cross Navigator maps INTERNORMEN 05.9800.6VG.10.E.P.4 to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 7957087 page in verification queue	UFI	full	Filtrec's official Cross Navigator maps FILTRATION GROUP 7957087 to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CHP423F06XN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps OMT CHP423F06XN to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ H9108	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN H9108 to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC9800FCN4H	Pall	full	Filtrec's official Cross Navigator maps PALL HC9800FCN4H to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC9800FKN4H	Pall	full	Filtrec's official Cross Navigator maps PALL HC9800FKN4H to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF7101	Fleetguard	full	Filtrec's official Cross Navigator maps FLEETGUARD HF7101 to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SP-024-E-05-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SP024E05B to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ V6011B1C05	Eaton / Internormen	full	Filtrec's official Cross Navigator maps VICKERS V6011B1C05 to FILTREC D120G06A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HD509/6	MANN-FILTER	partial	MANN-FILTER's online catalog lists D120G06A (FILTREC) as a comparison number for HD5096. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF30022	Fleetguard	partial	Fleetguard's online catalog lists D120G06A as an interchange for HF30022. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SBF-9800-4Z5B	Schroeder Industries	partial	Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D120G06A model number is decoded

G06Filtrec internal media grade code (glassfiber, 7 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D120G06A filter element?

The published envelope is 50 mm OD × 116 mm length with a 24.5 mm inside diameter (1.969 × 4.567 in × 0.965 in ID). Confirm against the housing drawing before ordering.

What micron rating does D120G06A use?

This element is rated 7 µm absolute — β7(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D120G06A filter element?

9 catalog-confirmed full match(es) (05.9800.6VG.10.E.P.4, 7957087, CHP423F06XN…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 33 catalog element(s) share the 50×116 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

Other models in the Filtrec elements series

All 9874 (list page 2/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.