Filtrec · Filtrec elements · inline line
D112G10BV filter element: specifications & equivalents
The D112G10BV is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 45 × 210 mm OD × length (ID 25.4 mm), rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 12 µm |
| Rating basis | absolute |
| Beta ratio | β12(c)≥1000 |
| Outside diameter OD | 45 mm |
| Inside diameter ID | 25.4 mm |
| Length | 210 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | D112G10BV |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 45 mm (1.772 in) |
| Inside diameter | 25.4 mm (1.000 in) |
| Overall length | 210 mm (8.268 in) |
All 45×210 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ 10708D10BHV page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYDAC 10708D10BHV to FILTREC D112G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 933579Q | Parker | full | Filtrec's official Cross Navigator maps PARKER 933579Q to FILTREC D112G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ H90218010BHV page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYCON H90218010BHV to FILTREC D112G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HC9021FCS8Z | Pall | full | Filtrec's official Cross Navigator maps PALL HC9021FCS8Z to FILTREC D112G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ P167183 | Donaldson | full | Filtrec's official Cross Navigator maps DONALDSON P167183 to FILTREC D112G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SBF-9021-8Z10V | Schroeder Industries | full | Filtrec's official Cross Navigator maps SCHROEDER SBF90218Z10V to FILTREC D112G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 57860 | WIX Filters | partial | Filtrec's official Cross Navigator maps WIX 57860 to FILTREC D112G10BV as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (10 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HF30566 | Fleetguard | partial | Fleetguard's online catalog lists D112G10BV as an interchange for HF30566. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ PT9406-MPG | Baldwin Filters | partial | Baldwin's Form 561 Number-Finder cross-reference lists D112G10BV (FILTREC) as replaced by Baldwin PT9406-MPG. Form/fit listing without published performance data — verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the D112G10BV model number is decoded
- G10Filtrec internal media grade code (glassfiber, 12 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the D112G10BV filter element?
What micron rating does D112G10BV use?
What replaces the D112G10BV filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 19 catalog element(s) share the 45×210 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 2/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.