Filtrec · Filtrec elements · inline line
D111G25B filter element: specifications & equivalents
The D111G25B is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 45 × 114 mm OD × length (ID 25.4 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 45 × 114 mm
Inside diameter 25.4 mm
Filtration rating 22 µm abs.
Beta rating β 22(c)≥1000
Media glassfiber
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | glassfiber |
| Filtration rating | 22 µm |
| Rating basis | absolute |
| Beta ratio | β22(c)≥1000 |
| Outside diameter OD | 45 mm |
| Inside diameter ID | 25.4 mm |
| Length | 114 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | D111G25B |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 45 mm (1.772 in) |
| Inside diameter | 25.4 mm (1.000 in) |
| Overall length | 114 mm (4.488 in) |
All 45×114 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ CDHP11A25BN page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps DOMANGE CDHP11A25BN to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ CF9211A25HA page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FAI FILTRI CF9211A25HA to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ F90214K25B page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FILTER MART F90214K25B to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ H90214020BH page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps HYCON H90214020BH to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF7051 | Fleetguard | full | Filtrec's official Cross Navigator maps FLEETGUARD HF7051 to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ M1A25HA | MP Filtri | full | Filtrec's official Cross Navigator maps MP FILTRI M1A25HA to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ QH9021A12B04 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps QUALITY FILTRATION QH9021A12B04 to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ SP-010-F-20-B | STAUFF | full | Filtrec's official Cross Navigator maps STAUFF SP010F20B to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 05.9021.25VG.210.E.P.4 | Eaton / Internormen | partial | Filtrec's official Cross Navigator maps INTERNORMEN 05.9021.25VG.210.E.P.4 to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (20 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HC9021FCT4H | Pall | partial | Filtrec's official Cross Navigator maps PALL HC9021FCT4H to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HC9021FDT4H | Pall | partial | Filtrec's official Cross Navigator maps PALL HC9021FDT4H to FILTREC D111G25B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HD55/2 | MANN-FILTER | partial | MANN-FILTER's online catalog lists D111G25B (FILTREC) as a comparison number for HD552. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ HF30204 | Fleetguard | partial | Fleetguard's online catalog lists D111G25B as an interchange for HF30204. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9021-4Z25B | Schroeder Industries | partial | Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the D111G25B model number is decoded
- G25Filtrec internal media grade code (glassfiber, 22 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the D111G25B filter element?
The published envelope is 45 mm OD × 114 mm length with a 25.4 mm inside diameter (1.772 × 4.488 in × 1.000 in ID). Confirm against the housing drawing before ordering.
What micron rating does D111G25B use?
This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the D111G25B filter element?
8 catalog-confirmed full match(es) (CDHP11A25BN, CF9211A25HA, F90214K25B…); 6 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
Same-envelope elements from other brands
View full interchange →These 29 catalog element(s) share the 45×114 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
D111G01B D111G01BV/ESD D111G03B D111G03BV D111G03BV/ESD D111G06B D111G06BV D111G06BV/ESD D111G10B D111G10BV
Other models in the Filtrec elements series
All 9874 (list page 2/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.