Filtrec · Filtrec elements · inline line

D111G25A filter element: specifications & equivalents

Q: What are the dimensions of the D111G25A filter element?

The published envelope is 45 mm OD × 113 mm length with a 25.5 mm inside diameter (1.772 × 4.449 in × 1.004 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D111G25A use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D111G25A is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 45 × 113 mm OD × length (ID 25.5 mm), rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 45 × 113 mm

Inside diameter 25.5 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	45 mm
Inside diameter ID	25.5 mm
Length	113 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D111G25A
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	45 mm (1.772 in)
Inside diameter	25.5 mm (1.004 in)
Overall length	113 mm (4.449 in)

All 45×113 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 10704D25BN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYDAC 10704D25BN to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 1400EAM252N1 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps PUROLATOR 1400EAM252N1 to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CF9201A25NA page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CF9201A25NA to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ F90204K25B page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FILTER MART F90204K25B to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ H90204020BN page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps HYCON H90204020BN to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ H9044	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN H9044 to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF7043	Fleetguard	full	Filtrec's official Cross Navigator maps FLEETGUARD HF7043 to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ M1A25NA	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI M1A25NA to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ QH9020A25B04 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps QUALITY FILTRATION QH9020A25B04 to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SP-010-E-20-B	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SP010E20B to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ V3041B1C20	Eaton / Internormen	full	Filtrec's official Cross Navigator maps VICKERS V3041B1C20 to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 05.9020.25VG.10.E.P.4	Eaton / Internormen	partial	Filtrec's official Cross Navigator maps INTERNORMEN 05.9020.25VG.10.E.P.4 to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (20 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HC9020FCT4H	Pall	partial	Filtrec's official Cross Navigator maps PALL HC9020FCT4H to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HC9020FKT4H	Pall	partial	Filtrec's official Cross Navigator maps PALL HC9020FKT4H to FILTREC D111G25A as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (25 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HD55/1	MANN-FILTER	partial	MANN-FILTER's online catalog lists D111G25A (FILTREC) as a comparison number for HD551. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF30707	Fleetguard	partial	Fleetguard's online catalog lists D111G25A as an interchange for HF30707. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ SBF-9020-4Z25B	Schroeder Industries	partial	Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D111G25A model number is decoded

G25Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D111G25A filter element?

The published envelope is 45 mm OD × 113 mm length with a 25.5 mm inside diameter (1.772 × 4.449 in × 1.004 in ID). Confirm against the housing drawing before ordering.

What micron rating does D111G25A use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D111G25A filter element?

11 catalog-confirmed full match(es) (10704D25BN, 1400EAM252N1, CF9201A25NA…); 6 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 61 catalog element(s) share the 45×113 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

04.852 126.100G.HR.E.P Eaton / Internormen · 100 µm 04.852 126.10VG.HR.E.P Eaton / Internormen · 10 µm 04.852 126.25VG.16.E.P Eaton / Internormen · 20 µm 04.852 126.3VG.HR.E.P Eaton / Internormen · 5 µm 04.852126.60G.16.E.P Eaton / Internormen D111C03AV Filtrec · 3 µm D111C10A Filtrec · 10 µm D111C10AV Filtrec · 10 µm D111C25A Filtrec · 25 µm D111C25AV Filtrec · 25 µm

Other models in the Filtrec elements series

All 9874 (list page 2/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.