Filtrec · Filtrec elements · inline line

D110T10B filter element: specifications & equivalents

Q: What are the dimensions of the D110T10B filter element?

The published envelope is 45 mm OD × 86 mm length with a 25.4 mm inside diameter (1.772 × 3.386 in × 1.000 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does D110T10B use?

This element is rated 10 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The D110T10B is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 45 × 86 mm OD × length (ID 25.4 mm), rated at 10 µm class. Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 45 × 86 mm

Inside diameter 25.4 mm

Filtration rating 10 µm nom.

Media wire-mesh

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	wire-mesh
Filtration rating	10 µm
Rating basis	nominal
Outside diameter OD	45 mm
Inside diameter ID	25.4 mm
Length	86 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	D110T10B
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	45 mm (1.772 in)
Inside diameter	25.4 mm (1.000 in)
Overall length	86 mm (3.386 in)

All 45×86 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ HP0651M10AH	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI HP0651M10AH to FILTREC D110T10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP0651M10AHP01	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI HP0651M10AHP01 to FILTREC D110T10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HP0651M10HA	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI HP0651M10HA to FILTREC D110T10B as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D110T10B model number is decoded

T10Filtrec internal media grade code (wire-mesh, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D110T10B filter element?

The published envelope is 45 mm OD × 86 mm length with a 25.4 mm inside diameter (1.772 × 3.386 in × 1.000 in ID). Confirm against the housing drawing before ordering.

What micron rating does D110T10B use?

This element is rated 10 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the D110T10B filter element?

3 catalog-confirmed full match(es) (HP0651M10AH, HP0651M10AHP01, HP0651M10HA)

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 15 catalog element(s) share the 45×86 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

D110C10A Filtrec · 10 µm D110C10AV Filtrec · 10 µm D110C25A Filtrec · 25 µm D110C25AV Filtrec · 25 µm D110G03A Filtrec · 5 µm D110G06A Filtrec · 7 µm D110G10A Filtrec · 12 µm D110G10B Filtrec · 12 µm D110G15A Filtrec · 17 µm D110G25A Filtrec · 22 µm

Other models in the Filtrec elements series

All 9874 (list page 2/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.