ElementRef

Filtrec · Filtrec elements · inline line

D102T60BV0 filter element: specifications & equivalents

The D102T60BV0 is a Filtrec inline-line hydraulic filter element, built with wire-mesh media, sized 35 × 93 mm OD × length (ID 12.5 mm), rated at 60 µm class. Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 35 × 93 mm
Inside diameter 12.5 mm
Filtration rating 60 µm nom.
Media wire-mesh
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

ParameterValue
Filter type inline line
Media wire-mesh
Filtration rating 60 µm
Rating basis nominal
Outside diameter OD 35 mm
Inside diameter ID 12.5 mm
Length 93 mm
Integral bypass valve none (housing/valve-dependent)
Manufacturer part no. D102T60BV0
Source catalog Filtrec S.p.A.: Filtrec Cross Navigator
Last verified2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

D102T60BV0 — FILTER ELEMENTFiltrec · Filtrec elements · inline line · dimensional reference drawingFRONT VIEWTOP VIEW93 mmØ35 mmØ35Ø12.5 boreTECHNICAL DATAElement typeinline lineMediawire-meshRating60 µm nominalOutside dia. OD35 mmInside dia. ID12.5 mmLength93 mmFiltrec S.p.A. — Filtrec Cross Navigator, accessed 2026-10-03NOTES1. Dimensions in millimetres, nominal values as cited in the source line above; manufacturing tolerances and interface details per the manufacturer data sheet.2. Schematic section derived from catalog data — not a manufacturer drawing. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.3. ElementRef is an independent reference database; not affiliated with, authorised or endorsed by Filtrec.ELEMENTREF · D102T60BV0DWG NO.ER-D102T60BV0-DWG-01DATA DATE2026-10-03SCALE1.8:1REV.A
Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter35 mm (1.378 in)
Inside diameter12.5 mm (0.492 in)
Overall length93 mm (3.661 in)

All 35×93 mm interchange elements →

Cross references & equivalents

No catalog-verified cross references yet. This model is in the manual verification queue — request a verified equivalent.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the D102T60BV0 model number is decoded

  • T60Filtrec internal media grade code (wire-mesh, 60 µm).

Typical equipment & applications

  • Filtrec aftermarket replacement hydraulic/lube filter element (D family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

  • “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the D102T60BV0 filter element?
The published envelope is 35 mm OD × 93 mm length with a 12.5 mm inside diameter (1.378 × 3.661 in × 0.492 in ID). Confirm against the housing drawing before ordering.
What micron rating does D102T60BV0 use?
This element is rated 60 µm (nominal class). Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the D102T60BV0 filter element?
Cross references are being verified for this model — use the inquiry form and the engineering desk will confirm equivalents.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 166 catalog element(s) share the 35×93 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

01.E 30.100G.HR.E.EPDM.VA Eaton / Internormen · 100 µm 01.E 30.10G.30.E.P.- Eaton / Internormen · 10 µm 01.E 30.10G.30.E.V.VA Eaton / Internormen · 10 µm 01.E 30.10G.HR.E.P.- Eaton / Internormen · 10 µm 01.E 30.10G.HR.E.P.VA Eaton / Internormen · 10 µm 01.E 30.10G.HR.E.V.VA Eaton / Internormen · 10 µm 01.E 30.10M.HR.E.P.- Eaton / Internormen · 10 µm 01.E 30.10P.30.E.P.- Eaton / Internormen · 10 µm 01.E 30.10VG.30.E.P.- Eaton / Internormen · 10 µm 01.E 30.10VG.30.E.P.IS06 Eaton / Internormen · 10 µm

Other models in the Filtrec elements series

All 9874 (list page 2/20) →
A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.