Filtrec · Filtrec elements · inline line

C343G06V filter element: specifications & equivalents

Q: What are the dimensions of the C343G06V filter element?

The published envelope is 79 mm OD × 421 mm length with a 51 mm inside diameter (3.110 × 16.575 in × 2.008 in ID). Confirm against the housing drawing before ordering.

Q: What micron rating does C343G06V use?

This element is rated 7 µm absolute — β7(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The C343G06V is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 79 × 421 mm OD × length (ID 51 mm), rated at 7 µm absolute (β7(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 79 × 421 mm

Inside diameter 51 mm

Filtration rating 7 µm abs.

Beta rating β 7(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	7 µm
Rating basis	absolute
Beta ratio	β7(c)≥1000
Outside diameter OD	79 mm
Inside diameter ID	51 mm
Length	421 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	C343G06V
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	79 mm (3.110 in)
Inside diameter	51 mm (2.008 in)
Overall length	421 mm (16.575 in)

All 79×421 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 937192Q	Parker	full	Filtrec's official Cross Navigator maps PARKER 937192Q to FILTREC C343G06V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HC9604FCN16Z	Pall	full	Filtrec's official Cross Navigator maps PALL HC9604FCN16Z to FILTREC C343G06V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF30920N1 page in verification queue	Fleetguard	full	Filtrec's official Cross Navigator maps SEPARATION TECHNOLOGIES HF30920N1 to FILTREC C343G06V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SBF-9604-16Z5V	Schroeder Industries	full	Filtrec's official Cross Navigator maps SCHROEDER SBF960416Z5V to FILTREC C343G06V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF30920	Fleetguard	partial	Filtrec's official Cross Navigator maps FLEETGUARD HF30920 to FILTREC C343G06V as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (1 vs 7 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the C343G06V model number is decoded

G06Filtrec internal media grade code (glassfiber, 7 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (C family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the C343G06V filter element?

The published envelope is 79 mm OD × 421 mm length with a 51 mm inside diameter (3.110 × 16.575 in × 2.008 in ID). Confirm against the housing drawing before ordering.

What micron rating does C343G06V use?

This element is rated 7 µm absolute — β7(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the C343G06V filter element?

4 catalog-confirmed full match(es) (937192Q, HC9604FCN16Z, HF30920N1…); 1 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 14 catalog element(s) share the 79×421 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

C343G01 Filtrec · 4 µm C343G01V Filtrec · 4 µm C343G01V/ESD Filtrec · 4 µm C343G03 Filtrec · 5 µm C343G03V Filtrec · 5 µm C343G03V/ESD Filtrec · 5 µm C343G06 Filtrec · 7 µm C343G06V/ESD Filtrec · 7 µm C343G10 Filtrec · 12 µm C343G10V Filtrec · 12 µm

Other models in the Filtrec elements series

All 9874 (list page 1/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.