Filtrec · Filtrec elements · inline line

AWP107 filter element: specifications & equivalents

Q: What are the dimensions of the AWP107 filter element?

The published envelope is 107 mm OD × 183 mm length (4.213 × 7.205 in). Confirm against the housing drawing before ordering.

Q: What micron rating does AWP107 use?

This element is rated 40 µm (nominal class) — β40(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The AWP107 is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 107 × 183 mm OD × length, rated at 40 µm class (β40(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 107 × 183 mm

Filtration rating 40 µm nom.

Beta rating β 40(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	40 µm
Rating basis	nominal
Beta ratio	β40(c)≥2
Outside diameter OD	107 mm
Length	183 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	AWP107
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	107 mm (4.213 in)
Overall length	183 mm (7.205 in)

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ HF28935	Fleetguard	partial	Filtrec's official Cross Navigator maps FLEETGUARD HF28935 to FILTREC AWP107 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (45 vs 40 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ WD11001	MANN-FILTER	partial	MANN-FILTER's online catalog lists AWP107 (FILTREC) as a comparison number for WD11001. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the AWP107 model number is decoded

C40Filtrec internal media grade code (cellulose, 40 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (AWP family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the AWP107 filter element?

The published envelope is 107 mm OD × 183 mm length (4.213 × 7.205 in). Confirm against the housing drawing before ordering.

What micron rating does AWP107 use?

This element is rated 40 µm (nominal class) — β40(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the AWP107 filter element?

2 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Other models in the Filtrec elements series

All 9874 (list page 1/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.