Filtrec · Filtrec elements · inline line

A411G25 filter element: specifications & equivalents

Q: What are the dimensions of the A411G25 filter element?

The published envelope is 95 mm OD × 154 mm length (3.740 × 6.063 in). Confirm against the housing drawing before ordering.

Q: What micron rating does A411G25 use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The A411G25 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 95 × 154 mm OD × length, rated at 22 µm absolute (β22(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 95 × 154 mm

Filtration rating 22 µm abs.

Beta rating β 22(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	22 µm
Rating basis	absolute
Beta ratio	β22(c)≥1000
Outside diameter OD	95 mm
Length	154 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	A411G25
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	95 mm (3.740 in)
Overall length	154 mm (6.063 in)

All 95×154 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 19812929310 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps YANMAR 19812929310 to FILTREC A411G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ BT8841-MPG	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN BT8841MPG to FILTREC A411G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CSD05000A25A page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CSD05000A25A to FILTREC A411G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SBF1643816Z10	Schroeder Industries	full	Filtrec's official Cross Navigator maps SCHROEDER SBF1643816Z10 to FILTREC A411G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ 51456	WIX Filters	partial	Filtrec's official Cross Navigator maps WIX 51456 to FILTREC A411G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (9 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ HF6554	Fleetguard	partial	Fleetguard's online catalog lists A411G25 as an interchange for HF6554. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ P164381	Donaldson	partial	Filtrec's official Cross Navigator maps DONALDSON P164381 to FILTREC A411G25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (11 vs 22 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the A411G25 model number is decoded

G20Filtrec internal media grade code (glassfiber, 22 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the A411G25 filter element?

The published envelope is 95 mm OD × 154 mm length (3.740 × 6.063 in). Confirm against the housing drawing before ordering.

What micron rating does A411G25 use?

This element is rated 22 µm absolute — β22(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the A411G25 filter element?

4 catalog-confirmed full match(es) (19812929310, BT8841-MPG, CSD05000A25A…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 9 catalog element(s) share the 95×154 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

A411C05 Filtrec · 5 µm A411C10 Filtrec · 10 µm A411C15 Filtrec · 15 µm A411C25 Filtrec · 25 µm A411G06 Filtrec · 7 µm A411G10 Filtrec · 12 µm A411G15 Filtrec · 17 µm A411G15R Filtrec · 17 µm A411G40 Filtrec · 35 µm

Other models in the Filtrec elements series

All 9874 (list page 1/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.