Filtrec · Filtrec elements · inline line

A210C10BM filter element: specifications & equivalents

Q: What are the dimensions of the A210C10BM filter element?

The published envelope is 96 mm OD × 148 mm length (3.780 × 5.827 in). Confirm against the housing drawing before ordering.

Q: What micron rating does A210C10BM use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The A210C10BM is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 96 × 148 mm OD × length, rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 96 × 148 mm

Filtration rating 10 µm nom.

Beta rating β 10(c)≥2

Media cellulose

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	cellulose
Filtration rating	10 µm
Rating basis	nominal
Beta ratio	β10(c)≥2
Outside diameter OD	96 mm
Length	148 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	A210C10BM
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	96 mm (3.780 in)
Overall length	148 mm (5.827 in)

All 96×148 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ A13A10CBM page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps WIX A13A10CBM to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ BT8935	Baldwin Filters	full	Filtrec's official Cross Navigator maps BALDWIN BT8935 to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CT050P10AB	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI CT050P10AB to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CTT05003P10A page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CTT05003P10A to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CTT5003P10A page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CTT5003P10A to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CTT50P10A	MP Filtri	full	Filtrec's official Cross Navigator maps MP FILTRI CTT50P10A to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FDB31P10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps DOMANGE FDB31P10 to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ FHR1M10 page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FBN FHR1M10 to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ SFCT-3510-E	STAUFF	full	Filtrec's official Cross Navigator maps STAUFF SFCT3510E to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF7901	Fleetguard	partial	Fleetguard's online catalog lists A210C10BM as an interchange for HF7901. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ P565242	Donaldson	partial	Filtrec's official Cross Navigator maps DONALDSON P565242 to FILTREC A210C10BM as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (7 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the A210C10BM model number is decoded

C10Filtrec internal media grade code (cellulose, 10 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the A210C10BM filter element?

The published envelope is 96 mm OD × 148 mm length (3.780 × 5.827 in). Confirm against the housing drawing before ordering.

What micron rating does A210C10BM use?

This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the A210C10BM filter element?

9 catalog-confirmed full match(es) (A13A10CBM, BT8935, CT050P10AB…); 2 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 8 catalog element(s) share the 96×148 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

A110C10/1 Filtrec · 10 µm A110C25/1 Filtrec · 25 µm A110G25/1 Filtrec · 22 µm A210C25BM Filtrec · 25 µm A210G10BM Filtrec · 12 µm A210G25BM Filtrec · 22 µm A210T125BM Filtrec · 125 µm A210T60BM Filtrec · 60 µm

Other models in the Filtrec elements series

All 9874 (list page 1/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.