Filtrec · Filtrec elements · inline line
A152C10 filter element: specifications & equivalents
The A152C10 is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 128 × 266 mm OD × length, rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | cellulose |
| Filtration rating | 10 µm |
| Rating basis | nominal |
| Beta ratio | β10(c)≥2 |
| Outside diameter OD | 128 mm |
| Length | 266 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | A152C10 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 128 mm (5.039 in) |
| Overall length | 266 mm (10.472 in) |
All 128×266 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 51860 | WIX Filters | full | Filtrec's official Cross Navigator maps WIX 51860 to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 927736 | Parker | full | Filtrec's official Cross Navigator maps PARKER 927736 to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ BT389-10 | Baldwin Filters | full | Filtrec's official Cross Navigator maps BALDWIN BT38910 to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ CG150P10A | MP Filtri | full | Filtrec's official Cross Navigator maps MP FILTRI CG150P10A to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ CSG15060P10A page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FAI FILTRI CSG15060P10A to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ CS150P10AP01 | MP Filtri | full | Filtrec's official Cross Navigator maps MP FILTRI CSG150P10A to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ E0211B2P10 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps WESTERN E0211B2P10 to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF6135 | Fleetguard | partial | Filtrec's official Cross Navigator maps FLEETGUARD HF6135 to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (6 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HF6711 | Fleetguard | partial | Fleetguard's online catalog lists A152C10 as an interchange for HF6711. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ P550251 | Donaldson | partial | Filtrec's official Cross Navigator maps DONALDSON P550251 to FILTREC A152C10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (7 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ SF-6721 | STAUFF | partial | STAUFF Filter Interchange lists A152C10 (FILTREC) as replaced by SF-6721. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ WD13009X | MANN-FILTER | partial | MANN-FILTER's online catalog lists A152C10 (FILTREC) as a comparison number for WD13009X. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the A152C10 model number is decoded
- C10Filtrec internal media grade code (cellulose, 10 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the A152C10 filter element?
What micron rating does A152C10 use?
What replaces the A152C10 filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 14 catalog element(s) share the 128×266 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 1/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.