Filtrec · Filtrec elements · inline line

A140G10 filter element: specifications & equivalents

Q: What are the dimensions of the A140G10 filter element?

The published envelope is 96 mm OD × 145 mm length (3.780 × 5.709 in). Confirm against the housing drawing before ordering.

Q: What micron rating does A140G10 use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

The A140G10 is a Filtrec inline-line hydraulic filter element, built with glassfiber media, sized 96 × 145 mm OD × length, rated at 12 µm absolute (β12(c)≥1000). Verify against the current manufacturer data sheet before ordering.

Envelope OD × L 96 × 145 mm

Filtration rating 12 µm abs.

Beta rating β 12(c)≥1000

Media glassfiber

Line type inline

Catalog verified. Parameters extracted from the manufacturer’s electronic catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.

Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.

Specification table

Parameter	Value
Filter type	inline line
Media	glassfiber
Filtration rating	12 µm
Rating basis	absolute
Beta ratio	β12(c)≥1000
Outside diameter OD	96 mm
Length	145 mm
Integral bypass valve	none (housing/valve-dependent)
Manufacturer part no.	A140G10
Source catalog	Filtrec S.p.A.: Filtrec Cross Navigator
Last verified	2026-10-03

Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.

Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.

Dimensional drawing

Reference drawing generated from the source values cited on this page — nominal envelope, schematic section, not a manufacturer drawing. The PDF is A3 landscape and vector; the PNG is sized for a WhatsApp preview. Confirm thread, end caps, seal compound and micron/Beta grade against the original element before ordering.

Dimensions & series range

Outside diameter	96 mm (3.780 in)
Overall length	145 mm (5.709 in)

All 96×145 mm interchange elements →

Cross references & equivalents

Equivalent model	Brand	Match level	Note
↔ 935165	Parker	full	Filtrec's official Cross Navigator maps PARKER 935165 to FILTREC A140G10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ A06A10G page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps WIX A06A10G to FILTREC A140G10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ BT37110MPG page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps BALDWIN BT37110MPG to FILTREC A140G10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ CSG05060A10A page in verification queue	Aftermarket	full	Filtrec's official Cross Navigator maps FAI FILTRI CSG05060A10A to FILTREC A140G10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF6679	Fleetguard	full	Filtrec's official Cross Navigator maps FLEETGUARD HF6679 to FILTREC A140G10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade.
↔ HF30014	Fleetguard	partial	Fleetguard's online catalog lists A140G10 as an interchange for HF30014. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting.
↔ HF6612	Fleetguard	partial	Filtrec's official Cross Navigator maps FLEETGUARD HF6612 to FILTREC A140G10 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (4 vs 12 µm) — verify efficiency class and collapse/seal for the housing before substituting.
↔ SBF-7400-4Z10B	Schroeder Industries	partial	Schroeder online cross-reference (FILTREC); envelope match — verify grade and seals.

Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.

Full chart: Filtrec cross reference chart →

How the A140G10 model number is decoded

G10Filtrec internal media grade code (glassfiber, 12 µm).

Typical equipment & applications

Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.

Selection pitfalls — read before you substitute

“10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.

Frequently asked questions

What are the dimensions of the A140G10 filter element?

The published envelope is 96 mm OD × 145 mm length (3.780 × 5.709 in). Confirm against the housing drawing before ordering.

What micron rating does A140G10 use?

This element is rated 12 µm absolute — β12(c)≥1000. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.

What replaces the A140G10 filter element?

5 catalog-confirmed full match(es) (935165, A06A10G, BT37110MPG…); 3 partial match(es) requiring parameter review

Is a same-envelope aftermarket element always a drop-in replacement?

No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.

Same-envelope elements from other brands

View full interchange →

These 8 catalog element(s) share the 96×145 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.

01.WP 45.10P.E.P Eaton / Internormen · 10 µm 01.WP 45.10VG.E.P Eaton / Internormen · 10 µm A140C10 Filtrec · 10 µm A140C25 Filtrec · 25 µm A140CW25 Filtrec A140G03 Filtrec · 5 µm A140G06 Filtrec · 7 µm A140G25 Filtrec · 22 µm

Other models in the Filtrec elements series

All 9874 (list page 1/20) →

A105C05 96×60 mm · 5 µm A105C10 96×60 mm · 10 µm A105C25 96×60 mm · 25 µm A105G03 96×60 mm · 5 µm A105G06 96×60 mm · 7 µm A105G10 96×60 mm · 12 µm A105G25 96×60 mm · 22 µm A105T125 96×60 mm · 125 µm A105T250 96×60 mm · 250 µm A105T60 96×60 mm · 60 µm

Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.