Filtrec · Filtrec elements · inline line
A120C25 filter element: specifications & equivalents
The A120C25 is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 129 × 182 mm OD × length, rated at 25 µm class (β25(c)≥2). Verify against the current manufacturer data sheet before ordering.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | cellulose |
| Filtration rating | 25 µm |
| Rating basis | nominal |
| Beta ratio | β25(c)≥2 |
| Outside diameter OD | 129 mm |
| Length | 182 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | A120C25 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 129 mm (5.079 in) |
| Overall length | 182 mm (7.165 in) |
All 129×182 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 57058 | WIX Filters | full | Filtrec's official Cross Navigator maps WIX 57058 to FILTREC A120C25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ 9455251455 page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps BOSCH 9455251455 to FILTREC A120C25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ BT8475 | Baldwin Filters | full | Filtrec's official Cross Navigator maps BALDWIN BT8475 to FILTREC A120C25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ HF7835 | Fleetguard | partial | Fleetguard's online catalog lists A120C25 as an interchange for HF7835. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ P171616 | Donaldson | partial | Filtrec's official Cross Navigator maps DONALDSON P171616 to FILTREC A120C25 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (27 vs 25 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ SFC-5725-E | STAUFF | partial | STAUFF Filter Interchange lists A120C25 (FILTREC) as replaced by SFC-5725-E. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ WD12002 | MANN-FILTER | partial | MANN-FILTER's online catalog lists A120C25 (FILTREC) as a comparison number for WD12002. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the A120C25 model number is decoded
- C25Filtrec internal media grade code (cellulose, 25 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the A120C25 filter element?
What micron rating does A120C25 use?
What replaces the A120C25 filter element?
Is a same-envelope aftermarket element always a drop-in replacement?
Same-envelope elements from other brands
View full interchange →These 8 catalog element(s) share the 129×182 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 1/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.