Filtrec · Filtrec elements · inline line
A111C10/9 filter element: specifications & equivalents
The A111C10/9 is a Filtrec inline-line hydraulic filter element, built with cellulose media, sized 96 × 213 mm OD × length, rated at 10 µm class (β10(c)≥2). Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 96 × 213 mm
Filtration rating 10 µm nom.
Beta rating β 10(c)≥2
Media cellulose
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-10-03. Confidence score 0.90.
Dimensions and media grade are taken from Filtrec’s official Cross Navigator, which maps this element to specific competitor part numbers. Filtrec does not publish collapse pressure or seal compound in this API for every code — verify collapse rating, seal execution and bypass setting against the current Filtrec data sheet for the target housing before ordering.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | cellulose |
| Filtration rating | 10 µm |
| Rating basis | nominal |
| Beta ratio | β10(c)≥2 |
| Outside diameter OD | 96 mm |
| Length | 213 mm |
| Integral bypass valve | none (housing/valve-dependent) |
| Manufacturer part no. | A111C10/9 |
| Source catalog | Filtrec S.p.A.: Filtrec Cross Navigator |
| Last verified | 2026-10-03 |
Sources: Filtrec S.p.A. — Filtrec Cross Navigator — accessed 2026-10-03.
Filtrec® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Filtrec distributor.
Dimensional drawing
Dimensions & series range
| Outside diameter | 96 mm (3.780 in) |
| Overall length | 213 mm (8.386 in) |
All 96×213 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 51628 | WIX Filters | full | Filtrec's official Cross Navigator maps WIX 51628 to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ BT8443 | Baldwin Filters | full | Filtrec's official Cross Navigator maps BALDWIN BT8443 to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ CG070P10A | MP Filtri | full | Filtrec's official Cross Navigator maps MP FILTRI CG070P10A to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ CS07030P10C page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FAI FILTRI CS07030P10C to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
|
↔ CS7030P10A page in verification queue | Aftermarket | full | Filtrec's official Cross Navigator maps FAI FILTRI CS7030P10A to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ CS070P10AP01 | MP Filtri | full | Filtrec's official Cross Navigator maps MP FILTRI CSG070P10A to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ CS070P10AP01 | MP Filtri | full | Filtrec's official Cross Navigator maps MP FILTRI CSG70P10A to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. |
| ↔ 51461 | WIX Filters | partial | Filtrec's official Cross Navigator maps WIX 51461 to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (32 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HF6417 | Fleetguard | partial | Filtrec's official Cross Navigator maps FLEETGUARD HF6417 to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (28 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ HF6511 | Fleetguard | partial | Filtrec's official Cross Navigator maps FLEETGUARD HF6511 to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (16 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ P565059 | Donaldson | partial | Filtrec's official Cross Navigator maps DONALDSON P565059 to FILTREC A111C10/9 as a direct replacement, publishing the FILTREC element's OD/ID/height envelope and media grade. Rated micron differs (7 vs 10 µm) — verify efficiency class and collapse/seal for the housing before substituting. |
| ↔ SF-6521 | STAUFF | partial | STAUFF Filter Interchange lists A111C10/9 (FILTREC) as replaced by SF-6521. Envelope dimensions are published; media grade and performance data are not — confirm before substituting in cleanliness-critical circuits. |
| ↔ WD10011 | MANN-FILTER | partial | MANN-FILTER's online catalog lists A111C109 (FILTREC) as a comparison number for WD10011. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ WD10020 | MANN-FILTER | partial | MANN-FILTER's online catalog lists A111C10/9 (FILTREC) as a comparison number for WD10020. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
Full chart: Filtrec cross reference chart →
How the A111C10/9 model number is decoded
- C10Filtrec internal media grade code (cellulose, 10 µm).
Typical equipment & applications
- Filtrec aftermarket replacement hydraulic/lube filter element (A family), form-fit-function cross-referenced in Filtrec's official Cross Navigator.
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
Frequently asked questions
What are the dimensions of the A111C10/9 filter element?
The published envelope is 96 mm OD × 213 mm length (3.780 × 8.386 in). Confirm against the housing drawing before ordering.
What micron rating does A111C10/9 use?
This element is rated 10 µm (nominal class) — β10(c)≥2. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the A111C10/9 filter element?
7 catalog-confirmed full match(es) (51628, BT8443, CG070P10A…); 7 partial match(es) requiring parameter review
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
Same-envelope elements from other brands
View full interchange →These 18 catalog element(s) share the 96×213 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the Filtrec elements series
All 9874 (list page 1/20) →Reviewed & verified by the ElementRef engineering desk against Filtrec S.p.A. on 2026-10-03. Read our editorial & correction policy.