Eaton / Internormen · 01.E / 01.N / Easy-Fit · inline line
05.9601.12.200.210.E.P.16 filter element: specifications & equivalents
The 05.9601.12.200.210.E.P.16 is a Eaton / Internormen inline-line hydraulic filter element, built with glass fiber fleece (api) media, sized 80 × 431 mm OD × length, rated at 10 µm absolute. Verify against the current manufacturer data sheet before ordering.
Specs come from Eaton's product data hub via its site-search API. The µm retention rating follows ISO 16889 (absolute convention), while the model-code fineness grade is nominal — match both before substituting.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Glass fiber fleece (API) |
| Filtration rating | 10 µm |
| Rating basis | absolute |
| Outside diameter OD | 80 mm |
| Length | 431 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 210 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Seal material | Nitrile (Buna-N) |
| Manufacturer part no. | 312767 |
| Source catalog | Eaton: Eaton product data hub via site search API (eaton.com) |
| Last verified | 2026-09-28 |
Sources: Eaton — Eaton product data hub via site search API (eaton.com) — accessed 2026-09-29.
Eaton / Internormen® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Eaton / Internormen distributor.
Dimensions & series range
| Outside diameter | 80 mm (3.150 in) |
| Overall length | 431 mm (16.969 in) |
All 80×431 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
|
↔ HC9601FDS16H page in verification queue | Pall | partial | Eaton's filtration cross-reference lists HC9601FDS16H (Pall) as an interchange for 05.9601.12.200.210.E.P.16. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ HC9601FHS16H page in verification queue | Pall | partial | Eaton's filtration cross-reference lists HC9601FHS16H (Pall) as an interchange for 05.9601.12.200.210.E.P.16. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ HC9601FKS16H page in verification queue | Pall | partial | Eaton's filtration cross-reference lists HC9601FKS16H (Pall) as an interchange for 05.9601.12.200.210.E.P.16. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ SBF-9601-16Z25B | Schroeder Industries | partial | Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the 05.9601.12.200.210.E.P.16 model number is decoded
- 05.9601.12.200.210.E.P.16Eaton Easy-Fit filter element model code (Eaton Easy-Fit Exchange Filter Element).
- 312767Eaton catalog number (order code) for the same element.
- 12.200 (API)Filter fineness grade: nominal rating and media letter.
- 10 µmISO 16889 multipass retention rating as published by Eaton.
- Glass fiber fleece (API)Filter media execution.
- 210 barDelta-P resistance class — maximum differential pressure (collapse) rating.
- Nitrile (Buna-N)Seal compound.
- 80 mmOuter diameter.
- 431 mmElement height.
Typical equipment & applications
- Medium-pressure in-line and lubrication circuits
- Spin-on and exchange element replacements
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the 05.9601.12.200.210.E.P.16 filter element?
What micron rating does 05.9601.12.200.210.E.P.16 use?
What replaces the 05.9601.12.200.210.E.P.16 filter element?
How do I read the 05.9601.12.200.210.E.P.16 part number?
Is a same-envelope aftermarket element always a drop-in replacement?
How often should a hydraulic return-line element be replaced?
Same-envelope elements from other brands
View full interchange →These 5 catalog element(s) share the 80×431 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
Other models in the 01.E / 01.N / Easy-Fit series
All 3329 →Reviewed & verified by the ElementRef engineering desk against Eaton on 2026-09-28. Read our editorial & correction policy.