Eaton / Internormen · 01.E / 01.N / Easy-Fit · inline line
05.9600.25VG.10.E.P.4 filter element: specifications & equivalents
The 05.9600.25VG.10.E.P.4 is a Eaton / Internormen inline-line hydraulic filter element, built with glass fiber fleece (vg) media, sized 80 × 116 mm OD × length, rated at 20 µm absolute. Verify against the current manufacturer data sheet before ordering.
Envelope OD × L 80 × 116 mm
Filtration rating 20 µm abs.
Media Glass fiber fleece (VG)
Collapse / burst 10 bar
Line type inline
Catalog verified. Parameters extracted from the manufacturer’s electronic
catalog / official interchange document and checked 2026-09-28. Confidence score 0.90.
Specs come from Eaton's product data hub via its site-search API. The µm retention rating follows ISO 16889 (absolute convention), while the model-code fineness grade is nominal — match both before substituting.
Specification table
| Parameter | Value |
|---|---|
| Filter type | inline line |
| Media | Glass fiber fleece (VG) |
| Filtration rating | 20 µm |
| Rating basis | absolute |
| Outside diameter OD | 80 mm |
| Length | 116 mm |
| End caps | open-ended cartridge element |
| Collapse / burst pressure | 10 bar |
| Integral bypass valve | none (housing/valve-dependent) |
| Seal material | Nitrile (Buna-N) |
| Manufacturer part no. | 301067 |
| Source catalog | Eaton: Eaton product data hub via site search API (eaton.com) |
| Last verified | 2026-09-28 |
Sources: Eaton — Eaton product data hub via site search API (eaton.com) — accessed 2026-09-29.
Eaton / Internormen® and all model designations are trademarks of their respective owners, used here for identification only — ElementRef is an independent reference site, not an authorized Eaton / Internormen distributor.
Dimensions & series range
| Outside diameter | 80 mm (3.150 in) |
| Overall length | 116 mm (4.567 in) |
All 80×116 mm interchange elements →
Cross references & equivalents
| Equivalent model | Brand | Match level | Note |
|---|---|---|---|
| ↔ 930099Q | Parker | partial | Eaton's filtration cross-reference lists 930099Q (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ 938963Q page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists 938963Q (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ FC7001F025BS page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists FC7001F025BS (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ FC7001Q020BS page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists FC7001Q020BS (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ FC7005F025BK page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists FC7005F025BK (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ FC7005Q020BK page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists FC7005Q020BK (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ GO1974Q page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists GO1974Q (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ GO3440 page in verification queue | Aftermarket | partial | Eaton's filtration cross-reference lists GO3440 (Parker) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ HC9600FDT4H page in verification queue | Pall | partial | Eaton's filtration cross-reference lists HC9600FDT4H (Pall) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ HC9600FKT4H page in verification queue | Pall | partial | Eaton's filtration cross-reference lists HC9600FKT4H (Pall) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
|
↔ HC9600FRT4H page in verification queue | Pall | partial | Eaton's filtration cross-reference lists HC9600FRT4H (Pall) as an interchange for 05.9600.25VG.10.E.P.4. Envelope cross-reference; verify micron grade, delta-P rating and seal configuration before substituting. |
| ↔ HD825/2 | MANN-FILTER | partial | MANN-FILTER's online catalog lists 05.9600.25VG.10.E.P.4 (INTERNORMEN) as a comparison number for HD8252. Envelope cross-reference; verify micron grade, collapse rating and seal configuration before substituting. |
| ↔ SBF-9600-4Z25B | Schroeder Industries | partial | Schroeder online cross-reference (INTERNORMEN); envelope match — verify grade and seals. |
Interchange levels: full catalog-confirmed drop-in · partial verify parameters · verify manual confirmation required. Links resolve to the equivalent model's specification page where available.
How the 05.9600.25VG.10.E.P.4 model number is decoded
- 05.9600.25VG.10.E.P.4Eaton Easy-Fit filter element model code (Eaton Easy-Fit Exchange Filter Element).
- 301067Eaton catalog number (order code) for the same element.
- 25 VGFilter fineness grade: nominal rating and media letter.
- 20 µmISO 16889 multipass retention rating as published by Eaton.
- Glass fiber fleece (VG)Filter media execution.
- 10 barDelta-P resistance class — maximum differential pressure (collapse) rating.
- Nitrile (Buna-N)Seal compound.
- 80 mmOuter diameter.
- 116 mmElement height.
Typical equipment & applications
- Medium-pressure in-line and lubrication circuits
- Spin-on and exchange element replacements
Selection pitfalls — read before you substitute
- “10 µm nominal” and “12 µm at β1000” can describe the very same media — one is reported at β≥200, the other at β≥1000 per ISO 16889. Compare ratings at the same Beta test point, not just the printed micron number.
- Nitrile (NBR) seals are standard for mineral hydraulic oil but fail early in some phosphate-ester fluids and at sustained high temperature; verify seal compound against the fluid data sheet (fluorocarbon/Viton executions may be required).
- End-cap geometry and the number/position of O-rings block interchange even when OD and length match — visually compare end caps before fitting, especially with aftermarket cartridges.
Frequently asked questions
What are the dimensions of the 05.9600.25VG.10.E.P.4 filter element?
The published envelope is 80 mm OD × 116 mm length (3.150 × 4.567 in). Confirm against the housing drawing before ordering.
What micron rating does 05.9600.25VG.10.E.P.4 use?
This element is rated 20 µm absolute. Always compare Beta ratings at the same test point: two brands may print different micron numbers for the same physical grade.
What replaces the 05.9600.25VG.10.E.P.4 filter element?
13 partial match(es) requiring parameter review
How do I read the 05.9600.25VG.10.E.P.4 part number?
See the designation decoder above: each segment of 05960025VG10EP4 encodes size, line type, filtration grade and media/collapse execution.
Is a same-envelope aftermarket element always a drop-in replacement?
No. Matching OD and length only proves the cartridge fits the bowl. End-cap style, seal compound, micron/Beta rating, collapse pressure and bypass configuration must also match; the table above tags every equivalent as full, partial or verify for exactly this reason.
How often should a hydraulic return-line element be replaced?
Replace at the housing manufacturer’s recommended differential-pressure setting (commonly signalled by a clogging indicator), or on a time-based service interval when no indicator is fitted — never wait for bypass to open continuously, because unfiltered oil then reaches the valves.
Same-envelope elements from other brands
View full interchange →These 27 catalog element(s) share the 80×116 mm envelope. Envelope match alone does not guarantee interchangeability — compare micron/Beta, seals and collapse rating.
R3.0812-06K1 R3.0812-08K1 05.9600.12.200.10.E.P.13 05.9600.12.200.10.E.P.4 05.9600.12.200.10.E.P.8 05.9600.12.200.10.E.V.13 05.9600.12.200.10.E.V.8 05.9600.25VG.10.E.P.13 05.9600.25VG.10.E.P.8 05.9600.25VG.10.E.V.13
Other models in the 01.E / 01.N / Easy-Fit series
All 3329 → 01.1910.40G.16.E.O.SON 01.20213.130G.E.O 01.21657.25VG.10.B.N.IS09 01.41542.25VG.16.B.N.IS09 01.AS 180.250G.-.E.T.- 01.AS 180.40G.-.E.T.- 01.AS 180.80G.-.E.T.- 01.AS 220.130G.-.B.-.- 01.AS 220.250G.-.B.-.- 01.AS 220.25G.-.B.-.-
Reviewed & verified by the ElementRef engineering desk against Eaton on 2026-09-28. Read our editorial & correction policy.