Envelope interchange · 3.58×12.91 in
91×328 mm filter elements
18 elements from 4 brand(s) share this envelope: 91 mm outside diameter and 328 mm overall length (3.58×12.91 in).
Dimensional interchange — verify before substituting. These cartridges fit the
same bowl space; they are not guaranteed drop-in equivalents. Compare grade,
end caps, seals, collapse rating and bypass configuration for the specific duty.
| Model | Brand | ID (mm) | Micron | β rating | Collapse (bar) | Bypass | Seal | Type |
|---|---|---|---|---|---|---|---|---|
| HD1066 | MANN-FILTER | 48 | — | — | — | housing | — | inline |
| HF30278 | Fleetguard | — | — | — | — | housing | — | inline |
| HF30504 | Fleetguard | — | 3 | 3 µm at β75(c); 4 µm at β200(c) per ISO 16889 | 206.843 | housing | — | inline |
| HF30761 | Fleetguard | — | — | — | — | housing | — | inline |
| R3.1033-03K1 | ARGO-HYTOS | 48.1 | 5 | — | 20 | housing | — | inline |
| R3.1033-06K1 | ARGO-HYTOS | 48.1 | 10 | — | 20 | housing | — | inline |
| R3.1033-08K1 | ARGO-HYTOS | 48.1 | 16 | — | 20 | housing | — | inline |
| 13HAS10 | Schroeder Industries | 48 | 10 | 10 µm at β(c) ≥ 1000 (99.9% efficiency) | 20 | housing | Nitrile (Buna-N) | inline |
| 13HASX10 | Schroeder Industries | 48 | 10 | 10 µm at β(c) ≥ 1000 (99.9% efficiency) | 207 | housing | Nitrile (Buna-N) | inline |
| 13HZ10 | Schroeder Industries | 48 | 10 | 10 µm at β(c) ≥ 1000 (99.9% efficiency) | 20 | housing | Nitrile (Buna-N) | inline |
| 13HZ10V | Schroeder Industries | 48 | 10 | 10 µm at β(c) ≥ 1000 (99.9% efficiency) | 20 | housing | Fluorocarbon (Viton) | inline |
| 13HZ25 | Schroeder Industries | 48 | 25 | 24 µm at β(c) ≥ 1000 (99.9% efficiency) | 20 | housing | Nitrile (Buna-N) | inline |
| 13HZ3 | Schroeder Industries | 48 | 3 | 4.8 µm at β(c) ≥ 1000 (99.9% efficiency) | 20 | housing | Nitrile (Buna-N) | inline |
| 13HZ5 | Schroeder Industries | 48 | 5 | 6.3 µm at β(c) ≥ 1000 (99.9% efficiency) | 20 | housing | Nitrile (Buna-N) | inline |
| 13HZX10 | Schroeder Industries | 48 | 10 | 10 µm at β(c) ≥ 1000 (99.9% efficiency) | 207 | housing | Nitrile (Buna-N) | inline |
| 13HZX25 | Schroeder Industries | 48 | 25 | 24 µm at β(c) ≥ 1000 (99.9% efficiency) | 207 | housing | Nitrile (Buna-N) | inline |
| 13HZX3 | Schroeder Industries | 48 | 3 | 4.8 µm at β(c) ≥ 1000 (99.9% efficiency) | 207 | housing | Nitrile (Buna-N) | inline |
| 13HZX5 | Schroeder Industries | 48 | 5 | 6.3 µm at β(c) ≥ 1000 (99.9% efficiency) | 207 | housing | Nitrile (Buna-N) | inline |
Substitution verification checklist
- Filtration grade. Compare at the same ISO 16889 Beta test point — “10 µm nominal” and “12 µm β1000” may be the same physical media.
- End caps & O-rings. Open/closed cap style and seal position block interchange even with identical OD/length.
- Seal compound. NBR is standard for mineral oil; phosphate-esters, high temperatures or bio-oils can demand fluorocarbon.
- Collapse rating. Low-collapse (~20 bar) return elements must never replace high-collapse (210 bar) pressure elements.
- Bypass strategy. Integral bypass valves (e.g. 3.4 bar) vs reusable housing valves change cold-start behaviour.
Frequently asked questions
Are all 91×328 mm filter elements interchangeable?
They share the same physical envelope — 91 mm OD and 328 mm length (3.58×12.91 in) — so they fit the same bowl. Interchangeability ends there: micron/Beta rating, end-cap geometry, seals, collapse rating and bypass configuration differ across the 18 elements listed and must be checked against the duty.
Is it a drop-in replacement if the OD and length match?
Only after verification. Confirm in order: (1) the filtration grade meets the ISO 4406 cleanliness target at the same Beta test point, (2) end-cap and O-ring arrangement is identical, (3) seal compound suits the fluid (NBR vs fluorocarbon), (4) collapse/burst rating fits pressure-line or cold-start conditions, and (5) the bypass strategy (integral valve vs housing valve) matches.
What is 91×328 mm in inches?
91×328 mm converts to approximately 3.58×12.91 in.
Browse all 91 mm OD elements or open the dimensions finder.
Request quote & availability
First reply within 2 business hours · first quotation — including the original brand and 1–2 verified equivalents — within 24 hours on business days.