Envelope interchange · 4.96×9.84 in
126×250 mm filter elements
24 elements from 3 brand(s) share this envelope: 126 mm outside diameter and 250 mm overall length (4.96×9.84 in).
Dimensional interchange — verify before substituting. These cartridges fit the
same bowl space; they are not guaranteed drop-in equivalents. Compare grade,
end caps, seals, collapse rating and bypass configuration for the specific duty.
| Model | Brand | ID (mm) | Micron | β rating | Collapse (bar) | Bypass | Seal | Type |
|---|---|---|---|---|---|---|---|---|
| RA-330-E-05-B | STAUFF | 92 | — | — | — | housing | — | inline |
| RA-330-E-10-B | STAUFF | 92 | — | — | — | housing | — | inline |
| RA-330-E-20-B | STAUFF | 92 | — | — | — | housing | — | inline |
| HF35114 | Fleetguard | 92 | 57 | 57 µm at β75(c) per ISO 16889 | 8 | housing | — | inline |
| R734C10 | Filtrec | 92 | 10 | β10(c)≥2 | — | housing | — | inline |
| R734C10P | Filtrec | 92 | 10 | β10(c)≥2 | — | housing | — | inline |
| R734C25 | Filtrec | 92 | 10 | β10(c)≥2 | — | housing | — | inline |
| R734G03 | Filtrec | 92 | 5 | β5(c)≥1000 | — | housing | — | inline |
| R734G03P | Filtrec | 92 | 5 | β5(c)≥1000 | — | housing | — | inline |
| R734G06P | Filtrec | 92 | 7 | β7(c)≥1000 | — | housing | — | inline |
| R734G10 | Filtrec | 92 | 12 | β12(c)≥1000 | — | housing | — | inline |
| R734G10P | Filtrec | 92 | 12 | β12(c)≥1000 | — | housing | — | inline |
| R734G10P/1 | Filtrec | 92 | 12 | β12(c)≥1000 | — | housing | — | inline |
| R734G10V | Filtrec | 92 | 12 | β12(c)≥1000 | — | housing | — | inline |
| R734G25 | Filtrec | 92 | 22 | β22(c)≥1000 | — | housing | — | inline |
| R734G25P | Filtrec | 92 | 22 | β22(c)≥1000 | — | housing | — | inline |
| R734T10 | Filtrec | 92 | 10 | — | — | housing | — | inline |
| R734T100 | Filtrec | 92 | 100 | — | — | housing | — | inline |
| R734T100P | Filtrec | 92 | 100 | — | — | housing | — | inline |
| R734T25 | Filtrec | 92 | 25 | — | — | housing | — | inline |
| R734T60P | Filtrec | 92 | 60 | — | — | housing | — | inline |
| WP774 | Filtrec | 92 | 10 | β10(c)≥2 | — | housing | — | inline |
| WP777 | Filtrec | 92 | 10 | β10(c)≥2 | — | housing | — | inline |
| WT1813 | Filtrec | 92 | 40 | — | — | housing | — | inline |
Substitution verification checklist
- Filtration grade. Compare at the same ISO 16889 Beta test point — “10 µm nominal” and “12 µm β1000” may be the same physical media.
- End caps & O-rings. Open/closed cap style and seal position block interchange even with identical OD/length.
- Seal compound. NBR is standard for mineral oil; phosphate-esters, high temperatures or bio-oils can demand fluorocarbon.
- Collapse rating. Low-collapse (~20 bar) return elements must never replace high-collapse (210 bar) pressure elements.
- Bypass strategy. Integral bypass valves (e.g. 3.4 bar) vs reusable housing valves change cold-start behaviour.
Frequently asked questions
Are all 126×250 mm filter elements interchangeable?
They share the same physical envelope — 126 mm OD and 250 mm length (4.96×9.84 in) — so they fit the same bowl. Interchangeability ends there: micron/Beta rating, end-cap geometry, seals, collapse rating and bypass configuration differ across the 24 elements listed and must be checked against the duty.
Is it a drop-in replacement if the OD and length match?
Only after verification. Confirm in order: (1) the filtration grade meets the ISO 4406 cleanliness target at the same Beta test point, (2) end-cap and O-ring arrangement is identical, (3) seal compound suits the fluid (NBR vs fluorocarbon), (4) collapse/burst rating fits pressure-line or cold-start conditions, and (5) the bypass strategy (integral valve vs housing valve) matches.
What is 126×250 mm in inches?
126×250 mm converts to approximately 4.96×9.84 in.
Browse all 126 mm OD elements or open the dimensions finder.
Request quote & availability
First reply within 2 business hours · first quotation — including the original brand and 1–2 verified equivalents — within 24 hours on business days.